When Tru-Fire designs a new product, we want to make certain it gives you, the consumer, years of trouble-free use and dependability. One of the first issues we address is using the same material on the internal firing mechanism. This is important because when different metals with different hardnesses are combined in a firing mechanism, premature wear can and often times will occur. Be careful, other release companies firing mechanisms are made from different metals altogether. Tru-Fire, on the other hand, designs firing mechanisms to utilize the same metal and hardness on all of our release firing components. Our patented 360 line of releases has a head and body that are independent of each other. This means you get full rotation in front of the body, not behind. Look for yourself, if your release has jaws and a trigger located in the same body or component, then your release is not a Tru-Rotater. If you want the finest, most precise length adjustment system in the industry – you’ve found it. Our system is able to adjust the length between the trigger and the strap by over 1". Within that inch there are 32 different length positions you can set. All this is done without the use of a tool. Just turn the head of the release or the black barrel behind the head and you are set. It’s that simple.